Here's some articles you may find relevant...
custom dashboard gauges
does any body know where i could get some custom dash dials made up. NZ or Aus, im really keen for some blue ones. but the dials for a gsl not one with a turbo gauge in the dash. thanks. Aaron
temperature gauge
hi
I just bought a cordia turbo 88
and I was wondering about the temperarue ot seems to be running a little hot because the gauge gos up to three quarters when im stop at traffic line
is that normal or not
ps i have a saab that dors it on summer
the car is only running on water no coolant at all
could it posibly be a termostat
no smoke at all is just seem to be running a little hot
any comments would be highly apreciated
Aftermarket gauges
Hi after having read Scott's post about installing a boost gauge it got me thinking, is the boost gauge the only gauge you can connect to the vaccum hoses? I ask this because i have a blow off valve going into 1 the nxt i will follow Scott's instructions for boost gauge leaving me 1 of the three he mentioned. I have a water gauge in the car that came with it and it doesn't seem to be working so i was wondering where the hell it's supposed to be hooked up to? CHEERS Josh
BOOST GAUGE - How to install
Ok so what you do is first decide where you want the gauge mounted. A good place is either on the drivers side A pillar or on the steering column surrounds like I have done in the pic below.
Boost Gauge Discrepencies
G'day.
I have just noticed that when i floor the cordia i get a reading of 10psi on the boost gauge i installed, but the factory boost gauge only reaches the 3/4 mark. I always thought the factory gauge maxes out at around 7psi.
Is this unusual? Which one is more likely telling the truth?
Any help much appreciated. Cheers.
Mitsubishi Cordia WHITE FACE GAUGES
hey guys i have just got some Mitsubishi Cordia WHITE FACE GAUGES and i was just wondering if there are any pros and cons about puting these on.
Hooking up a boost gauge to my cordia
hello just need sum help hooking up my autogauge boost guage to my cordia, i have a 2 inch boost gauge wif just a vaccume tube.
need a lil help hooking it up cheers :)
where is the temp gauge wire?
Can anybody tell me, or better yet take a photo of where the temp gauge wire (for the dash board) joins the loom.
Mine has had an after market one ever since I bought it, but have since hooked up a second sensor and am looking to bring the dash gauge back on line.
dodgy gauge
my cordia has been doing weird things the last few days...
the oil pressure gauge has been getting lower the higher the revs are... if you cruise along in top at around 70 its fine but the faster you go the lower it reads untill it hits zeroat around 110.... the engine doesnt sound dry when the pressure is really low so i'm thinking the gauge is faulty but just to be safe i'm taking it easy... i am gonna grab a mechanical gauge and check it that way but i'm just curious if anyone has had this problem before and whats needed to fix it etc...
Aftermarket Water Temp gauge having a spazz!!
I just installed my Water Temp gauge, and wired it up as it should be, it's reading the tempurature alright, BUT... when I put on the accelerator the needle goes spastic until I let off the throttle!
The gauge's power is sourced from the "Yellow ignition to ON" wire from the turbo timer, the turbo timer has a voltmeter in it...
Any tips would be good guys! 8)