Hi all,

I have a cordia AB TC06 Cordia. It's been a on again off again project of mind for over a year.

Recently, I tried to turn the motor over and it simply would not start so I did the following:

1. Checked the fuel - It was brown so I cleared it out and put new unleaded in

2. Cleaned out the throttle body and injectors

When I primed the throttle body with some petrol the car started. But did NOT last long. It seemed that as soon as the primed petrol had burned, the car stalled.

I immediately guessed it was the injectors.

Now, I do not think that the ECU is getting the injectors to squirt. I assume this as my multimeter does not seem to pick up a circuit.

I really have no idea why the injectors dont seem to be firing. Nothing wrong with them it seems. When I dismantle the throttle body, and look in, it is as dry as hell...therefore petrol is not injected???

I have a MT4 Microtech ECU that has been working fine. The last time I started the car was about 2 months ago. I get my wifes car to jump start me with no luck. But as I said, if I prime the throttle body with a cap full of petrol, it starts up and runs for about 4 seconds. Then dies.

Can anyone please suggest why the injectors dont seem to be firing????????

Thanks

Jeff