Wed, 08/25/2010 - 11:40
Are the any other model driveshafts that would bolt straight into my ab cordia, or any places in Melbourne anyone could recommend for a driveshaft reco, mine is knocking real bad, need to replace it soon!
_______________________________
1: rubbed back to bare metal: done
2: repaired dents and ripples: done
3: etch prime all bare metal surfaces: done
4: 2k primer coat: DONE
5: wet sand whole car: DONE
6: paint: DONE
Location
Just use the same part on your shaft, some CV places will do change over for a small cost.
_______________________________
This thing will decimate all.......once I've put another fifteen grand into it!